How to match the code of the drone remote control
The code control operation of the drone remote control is one of the key steps before flight to ensure that the remote control and the drone can communicate normally. The code matching methods of drones of different brands and models may vary slightly, but the basic principles are similar. This article will introduce in detail the coding method of the drone remote control and provide structured data to help users quickly grasp the operation process.
1. Preparation before code
1. Ensure that the drone and remote control are fully charged.
2. Check whether the drone and remote control are of the same brand and model.
3. Turn off other electronic devices that may interfere with the signal.
4. Refer to the manual to confirm the position of the code button or key combination.
| brand | Correction key position | Indicator status |
|---|---|---|
| DJI | Back or side of the remote control | Quick flash |
| Autel | Press the power button of the remote control for a long time | Extinguish after constant light |
| Holy Stone | Code keys on the drone | Two colors alternately flash |
2. Common drone code matching steps
The following is the general code matching process for mainstream brand drones:
| step | operate | Things to note |
|---|---|---|
| 1 | Turn on the drone and remote control at the same time | Turn on the remote control first and then turn on the drone |
| 2 | Press the code key (see the table above) | Keep pressing for 3-5 seconds |
| 3 | Observe the status changes of indicator lights | Changliang means successful code selection |
| 4 | Test the response of each channel of the remote control | Check if the rudder volume is normal |
3. Common reasons and solutions for coding failure
If the code is not successful, please refer to the following troubleshooting method:
| Problem phenomenon | Possible Causes | Solution |
|---|---|---|
| The indicator light does not light | Battery dead or poor contact | Charge or check battery connection |
| Fast flashing cannot be matched | Signal interference | Replace or restart equipment |
| No response after code | Firmware version mismatch | Upgrade the latest firmware |
4. Coding skills for special models
1.DJI remote control with screen: You need to manually select the "Recode" option in the settings menu.
2.FPV crossing machine: Usually, you need to use Betaflight and other parameter adjustment software to complete the code.
3.Toy-grade drone: Some models need to switch the remote control quickly three times to enter the code control mode.
5. Things to note after the code
1. It is recommended to perform calibration operations after the first code is successful.
2. Regularly check the connection status of the remote control and the drone
3. It is recommended to re-code when changing the flight site
4. Disconnect the battery when not in use for a long time
6. The latest drone code matching technology development
In recent years, drone code matching technology has been continuously upgraded:
1.NFC code matching: Some new remote controls support NFC touch code matching
2.APP assisted code matching: Complete the code matching process through mobile APP
3.Automatic code selection: Automatically identify and complete pairing when powered on
Mastering the correct code matching method can not only ensure flight safety, but also improve the operating experience. It is recommended that users read the instructions carefully and practice code correction operations regularly. If you encounter complex problems, you should contact the manufacturer's technical support in a timely manner.
check the details
check the details
en
