What tools are used to lift the trolley?
Crane lifting of trolleys is a common operation at construction sites, rescue sites or during vehicle transportation. To ensure safety and efficiency, choosing the right tool is crucial. This article will introduce in detail the tools, operating steps and precautions used when lifting a trolley with a crane. It will also provide you with a comprehensive reference based on the hot topics on the Internet in the past 10 days.
1. Common tools for cranes and trolleys
When a crane is used to lift a trolley, the following tools are usually required:
| Tool name | use | Things to note |
|---|---|---|
| sling | Used to fix the car to avoid damage to the car body | Choose lifting straps with appropriate load-bearing capacity to avoid overloading |
| wire rope | Suitable for heavy vehicles, high strength | Check for wear and prevent breakage |
| Lifting clamp | Clamp specific parts of the vehicle for quick lifting | Make sure the clamping is firm and avoid slipping |
| balancing beam | Disperse lifting pressure and maintain vehicle balance | Choose the appropriate balance beam based on vehicle weight |
2. Operation steps of crane and trolley
1.Preparation:Check the condition of the crane and trolley to make sure the tools are intact.
2.Fixed trolley:Use lifting straps or wire ropes to securely tie the trolley to prevent it from loosening.
3.Adjust the boom:Adjust the boom angle and length according to the weight and position of the trolley.
4.Lift slowly:Lift the car at a constant speed to avoid sudden acceleration or emergency stops.
5.Put it in place:Place the trolley smoothly to the target position and release the fixing tool.
3. Hot topics and content on the entire network in the past 10 days
The following are the hot topics that have attracted the attention of the entire Internet recently, which may be related to crane operations:
| hot topics | heat index | Related fields |
|---|---|---|
| New energy vehicle transportation safety | ★★★★★ | Logistics, transportation |
| Case analysis of construction site hoisting accidents | ★★★★☆ | construction, security |
| New lifting tool technology | ★★★☆☆ | Machinery, technology |
| Rapid lifting solution for rescue vehicles | ★★★☆☆ | emergency, rescue |
4. Precautions
1.Safety first:Operators must hold relevant qualifications and comply with safety regulations.
2.Tool check:Check whether the lifting tools are in good condition before each use and avoid using damaged tools.
3.Environmental Assessment:Make sure there are no obstacles at the hoisting site and that the ground has sufficient load-bearing capacity.
4.Weather effects:Hoisting operations should be suspended in bad weather such as strong winds, rain or snow.
5. Summary
Crane lifting is a highly technical operation. Choosing appropriate tools and standard operating procedures are the keys to ensuring safety. Through the introduction of this article, I believe you will have a deeper understanding of the tools and methods of crane lifting. At the same time, combined with recent hot topics, we can better grasp industry dynamics and technology development trends.
If you have more questions about hoisting operations, please leave a message for discussion!
check the details
check the details
en
